**Asia's Leading Manufacturing Exhibition with 1,030 Exhibitors**
Focus on DX, AI, IoT solutions, additive manufacturing, factory automation, motion control, mechanical components, factory facilities/equipment and more.
Major visitors are from design, development, production engineering, purchasing and information system divisions of manufacturers.
Conference where you can learn about cutting-edge case studies from the  industry leaders is also a highlight of the show.
It consists of 9 concurrent shows for each product category.\
\
What is M-Tech?\
M-Tech (Mechanical Components & Materials Technology Expo) is an exhibition of mechanical components such as motors, bearings, screws and springs, as well as cutting, pressing and surface treatment technologies.\
Every year, a large number of visitors from the design, development, prototyping, manufacturing, production engineering and purchasing departments come to the exhibition to discuss business with the exhibitors.\
M-Tech is held at Tokyo and also in Osaka, Nagoya and Fukuoka.

Manufacturing World 2023 Osaka (M-Tech)

### Asia's Leading Manufacturing Exhibition with 1,250 Exhibitors

Focus on DX, AI, IoT solutions, additive manufacturing, factory automation, motion control, mechanical components, factory facilities/equipment and more.\
Major visitors are from design, development, production engineering, purchasing and information system divisions of manufacturers.\
Conference where you can learn about cutting-edge case studies from the  industry leaders is also a highlight of the show.\
It consists of 9 concurrent shows for each product category.

Manufacturing World Osaka 2024

**Asia’s Leading Manufacturing Trade Show**

Manufacturing World Tokyo consists of 10 specialized shows, and focus on digital transformation services for manufacturers, factory automation, additive manufacturing, various mechanical components, measuring products and other factory facilities.

Major visitors are from design, development, production engineering, purchasing and information system divisions of automotive, heavy industry, electric, machinery and precision equipment manufacturers in the world.

Manufacturing World Tokyo 2024

Optimize productivity and transform factory production lines with Vietnam Manufacturing Expo 2024, which brings together more than 200 brands of machinery, equipment, and technology from more than 20 countries with the presence of more than 10,000 manufacturers, manufacturing, and supporting industries to explore cutting-edge advancements under the Future Factory theme.

Vietnam Manufacturing Expo 2024

Let us bring your product design to life.

Looking for an OEM manufacturer?

Taiwan Kodai was established in 1989 with a capital of $160,000 USD. We started supplying to Hitachi Koki Co., Ltd. in Japan second year in business, and currently have more than a dozen Japanese customers.

We export a lot of OEM parts to developed countries all over the world, and we have earned the trust of our customers. Our mission is to provide goods with high quality, reasonable price, and short delivery time, and we always have contributing to society and protecting the environment in mind.

Although we are a general trading company that specializes in handling various types of OEM parts, we also own a CNC factory to further fulfill customers needs. We hope to provide the best service to major manufacturers around the world.

Always at your service

About us

Taiwan is one of the few countries that has success in COVID-19 control. That means: your products will be manufactured <highlight>at full speed</highlight>.

Unaffected by COVID-19

Taiwan is known for its <highlight>high quality manufactured goods</highlight> from livelihood products to high tech IC chips.

High quality

Taiwan is a small island full of all kinds of SMBs, so your products could go through primary processing, secondary processing, advanced processing, and packing <highlight>lightning fast</highlight>.

Fast and complete supply chains

With care & trust

Why Made in Taiwan?

Manufacturing high quality products and parts is hard. Taiwan Kodai jumps through hoops for you, so you don't have to. Send us your working drawings and get a free quote now.

Asia OEM partner

Your trustworthy

An Asia OEM supplier | Taiwan Kodai

Check out OEM products and parts we have supplied

Products

We offer various metal fabrication processes including casting, forging, stamping, machining, metal injection molding, and etc. Metal parts are widely used in many industries such as electronic, computer, automotive, aerospace, medical, and etc.

Metals

We offer various plastic fabrication processes including injection molding, extrusion molding and blow molding. Plastic materials we work with are PS, PP, PA, PC, ABS, PVC, PET, PPS, BMS, SMC, PHENOLIC, UREA, PBT, and etc.

Plastics

We offer various rubber fabrication processes including liquid injection molding, injection molding, compression molding. Rubber parts are virtually used in all industries. Rubber provides the perfect material for o-rings, suction cups, stoppers, seals, key caps, rubber bands, and fittings.

Rubbers

Materials we work with

Services

Join us at these events

Upcoming Events

Taiwan Kodai is an Asia OEM supplier specializes in metal fabrication, plastic fabrication, and rubber fabrication.

Metal, plastic, rubber fabrication service | Taiwan Kodai

Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods. The process is to pour molten metal into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process.

The casting process is divided into two main categories: expendable and non-expendable casting. In expendable casting, a mold is temporary and non-reusable, and is needed to be reformed in each production cycle, while in non-expendable casting, a mold can be reused in all production cycle.

Here are some common casting processes we are capable of providing to you:

* Expendable mold casting

  * Sand casting
  * Investment casting
* Non-expendable mold casting

  * Die casting
  * Permanent mold casting

## Sand casting

Sand casting is the most used casting process of all metal castings. This process places a replica of the final workpiece in sand to create a mold. The advantage of sand casting is that molds made of sand are relatively cheap and sufficiently refractory. Also, sand casting allows for smaller batches at a reasonable cost. Sand casting allows most metals to be cast.

[See sand casting OEM parts →](/products/?processingMethods=sand-casting)

## [](/products/?processingMethod=casting)Investment casting

Investment casting is also known as "lost-wax casting". This process invests the pattern (a replica of the final workpiece made in waxes) with refractory material (e.g. ceramic) to create a mold. Often, several molds are assembled into a tree to allow casting several pieces simultaneously. The advantage of investment casting is that products come with great surface qualities, which can reduce the need for secondary processes. The disadvantage is the relatively high cost for short-run productions. Investment casting allows most metals to be cast.

[See investment casting OEM parts →](/products/?processingMethods=investment-casting)

## [](/products/?processingMethods=investment-casting)Die casting

Die casting forces molten metal under high preesure into a mold cavity. Die casting has large capital costs, but it is suited for small to medium size castings that require good surface finish and dimensional consistency.

The typical materials used in die casting are non-ferrous metals, such as:

* Zinc (Zn)
* Copper (Cu)
* Aluminium (Al)
* Magnesium (Mg)
* Lead (Pb)
* Tin-based alloys (Sn)

[See die casting OEM parts →](/products/?processingMethods=die-casting)

## [](/products/?processingMethods=die-casting)Permanent mold casting

Permanent mold casting, sometimes referred to as gravity casting, uses gravity to fill reusable molds. The advantage of permanent mold casting is the reusable mold. Permanent mold casting is used to manufacture gears, splines, wheels, gear housings, pipe fitting, fuel injection housings, and automotive engine pistons. The typical materials used in permanent mold casting are:

* Aluminum (Al)
* Magnesium (Mg)
* Copper (Cu)
* Tin (Sn)
* Zinc (Zn)
* Lead (Pb)
* Iron (Fe)
* Steel

[See permanent mold casting OEM parts →](/products/?processingMethods=permanent-mold-casting)

Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods. The process is to pour molten metal into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process.

Casting

Forging is a manufacturing process involving the shaping of metal using localized compressive forces. Forging can produce a piece that is stronger than an equivalent cast or machined part. Common forged products are gears, shafts, turbines, automobile parts, railroads, hand tools, kitchenware, jewellery, and etc. Forging is often classified according to the temperature at which it is performed:

## Hot forging

Hot forging operates above a metal's recrystallization temperature throughout the whole process. Iron and steel alloys are primarily forged in hot condition.

## Cold forging

Cold forging is usually done at room temperature. Brass, bronze, copper, precious metals are manufactured by cold forging processes.

## Warm forging

Warm forging occurs between room temperature and a metal's recrystallization temperature. The most common metals that are used in warm forging are steel alloys.

[See forging OEM parts →](/products/?processingMethods=forging)

Forging is a manufacturing process involving the shaping of metal using localized compressive forces. Forging can produce a piece that is stronger than an equivalent cast or machined part.

Forging

Stamping is the process of converting flat metal sheets into specific shapes. Stamping includes a variety of sheet-metal forming processes, such as punching, blanking, embossing, bending, flanging, and coining. Although stamped parts are not as strong as forged parts, they are good enough and cost effective for certain use cases.

[See stamping OEM parts →](/products/?processingMethods=stamping)

Stamping is the process of converting flat metal sheets into specific shapes.

Stamping

Machining is a process in which a metal is cut to a desired final shape, often by computer numerical control (CNC). The three principal machining processes are classified as turning, milling, and drilling.

## Turning

Turning operations are operations that rotate the workpiece as the primary method of moving metal against the cutting tool. Lathes are the principal machine tool used in turning.

## Milling

Milling operations are operations in which the cutting tool rotates to bring cutting edges to bear against the workpiece in contrast to turning operations.

## Drilling

Drilling operations are operations in which holes are produced or refined by bringing a rotating cutter with cutting edges into contact with the workpiece. Drilling operations are done primarily in drill presses.

[See machining OEM parts →](/products/?processingMethods=machining)

Machining is a process in which a metal is cut to a desired final shape, often by computer numerical control (CNC).

Machining

Metal injection molding (MIM) is a process in which finely-powdered metal is mixed with binder material and then shaped and solidified using injection molding. Metal injection molding is used to create small, intricate, high-volume products.

MIM can produce parts where it is difficult, or even impossible, to efficiently manufacture an item through other methods. The molding process allows high volume, complex parts to be shaped in a single step.

The most common metals used in MIM are stainless steels. The typical products are used in industrial, commercial, medical, dental, firearms, aerospace, and automotive applications.

[See MIM OEM parts →](/products/?processingMethods=mim)

Metal injection molding (MIM) is a process in which finely-powdered metal is mixed with binder material and then shaped and solidified using injection molding. Metal injection molding is used to create small, intricate, high-volume products.

Metal Injection Molding (MIM)

Wire forming is a process in which metal wire is angled, coiled, bent, or cut into a specific form. Common products produced by wire forming are springs, hooks, wire baskets, wire guards, clips, and etc.

The typical materials used in wire forming processes are aluminum, copper, steel, brass, stainless steel.

[See wire forming OEM parts →](/products/?processingMethods=wire-forming)

Wire forming is a process in which metal wire is angled, coiled, bent, or cut into a specific form. Common products produced by wire forming are springs, hooks, wire baskets, wire guards, clips, and etc.

Wire forming

Metal fabrication

Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. It is used to manufacture solid objects, such as bottle caps, phone cases, keyboards, toys, automotive parts, mechanical parts, gears, and etc. Injection molding is the most common modern method of manufacturing plastic parts.

These are commonly used plastic injection molding materials:

* Polystyrene (PS)
* Polypropylene (PP)
* Nylon Polyamide (PA)
* Polycarbonate (PC)
* Acrylonitrile Butadiene Styrene (ABS)
* Polyvinyl Chloride (PVC)
* Polyethylene Terephthalate (PET)
* Polyphenylene Sulfide (PPS)
* Polybutylene Terephthalate (PBT)
* Bulk molding compound (BMC)

[See plastic injection molding OEM parts →](/products/?materials=plastic&processingMethods=injection-molding)

Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. It is used to manufacture solid objects, such as bottle caps, phone cases, keyboards, and etc.

Plastic injection molding

Extrusion molding is a manufacturing process used to make pipes, hoses, drinking draws, curtain tracks, rods, and fibre. Extrusion molding is similar to injection molding except that a long continuous shape is produced.

These are commonly used plastic extrusion molding materials:

* Polyethylene (PE)
* Polypropylene (PP)
* Nylon Polyamide (PA)
* Polystyrene (PS)
* Polyvinyl Chloride (PVC)
* Acrylonitrile Butadiene Styrene (ABS)
* Polycarbonate (PC)

[See plastic extrusion molding OEM parts →](/products/?materials=plastic&processingMethods=extrusion-molding)

Extrusion molding is a manufacturing process used to make pipes, hoses, drinking draws, curtain tracks, rods, and fibre. Extrusion injection is similar to injection molding except that a long continuous shape is produced.

Plastic extrusion molding

Blow molding is a manufacturing process for forming and joining together hollow plastic parts. The most common product made with blow molding is a plastic drinking bottle.

These are commonly used plastic injection molding materials:

* Acrylonitrile Butadiene Styrene (ABS)
* Polystyrene (PS)
* Polypropylene (PP)
* Polyethylene Terephthalate (PET)
* High-Density Polyethylene (HDPE)
* Low-Density Polyethylene (LDPE)
* Nylon Polyamide (PA)
* Polyvinyl Chloride (PVC)
* Polycarbonate (PC)

[See plastic injection molding OEM parts →](/products/?materials=plastic&processingMethods=blow-molding)

Blow molding is a manufacturing process for forming and joining together hollow plastic parts. The most common product made with blow molding is a plastic drinking bottle.

Plastic blow molding

Plastic fabrication

Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Rubber injection molding can be used to manufacture a wide variety of products, such as O rings, handle grips, rubber bellows, rubber grommets, rubber bushes, anti-vibration grommets, rubber plugs, anti-vibration mounts, speed bumps, and etc.

These are commonly used rubber injection molding materials:

* EPDM
* Natural Rubber
* Neoprene
* Nitrile
* Butyl
* Fluorocarbon
* Fluorosilicone
* Hydrogenated Nitrile
* Viton
* Polyurethane
* Silicone

[See rubber injection molding OEM parts →](/products/?materials=rubber&processingMethods=injection-molding)

Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. It is used to manufacture solid objects, O rings, handle grips, rubber bellows, rubber grommets, rubber bushes, anti-vibration grommets, rubber plugs, anti-vibration mounts, speed bumps, and etc.

Rubber injection molding

Extrusion molding is a manufacturing process used to make long continuous shape products. The common usage of rubber extrusions are in applications such as sealing, noise control, vibration and decorative trim.

These are commonly used rubber extrusion molding materials:

* EPDM
* Styrene-butadiene (SBR)
* Silicone
* Nitrile
* Neoprene

[See rubber extrusion molding OEM parts →](/products/?materials=rubber&processingMethods=extrusion-molding)

Extrusion molding is a manufacturing process used to make long continuous shape products. The common usage of rubber extrusions are in applications such as sealing, noise control, vibration and decorative trim.

Your trustworthyAsia OEM partner

MIT
Why Made in Taiwan?

Services
Materials we work with

Metals

Plastics

Rubbers

Products
Check out OEM products and parts we have supplied

About us
Always at your service

Looking for an OEM manufacturer?Let us bring your product design to life.

Your trustworthyAsia OEM partner

MITWhy Made in Taiwan?

ServicesMaterials we work with

Metals

Plastics

Rubbers

ProductsCheck out OEM products and parts we have supplied

About usAlways at your service

Looking for an OEM manufacturer?Let us bring your product design to life.

MIT
Why Made in Taiwan?

Services
Materials we work with

Products
Check out OEM products and parts we have supplied

About us
Always at your service